Cracking the Code 5: Essential FAQ About YRC-S03 Intraoral Scanner – Specs, Accuracy & Benefits for Digital Dentistry

FAQ 1:How often should the YRC-S03 intraoral scanner be calibrated to better ensure its scanning accuracy?

A: No mandatory calibration is required; calibration is unnecessary unless there is any impact or damage.

FAQ 2: Can the cable connector for the YRC-S03 intraoral scanner be replaced with the type shown in the picture below?

A:A double-ended Type-C cable is fine, but we recommend using our original factory cable.

FAQ 3:Can our YRC-S03 scanner scan this type of object (as shown in the image below)?

A: Yes, but it must be a dedicated intraoral scanner; it cannot be made of reflective metal.

FAQ 4: Does the YRC-S03 intraoral scanner have photometric measurement capabilities?

A:If auxiliary functions are needed, the YRC-S03 software has measurement auxiliary functions.

FAQ 5:What is the FPS (frames per second) and resolution of the YRC-S03 scanner?

A: The YRC-S03 has a frame rate of 15 frames per second and a camera resolution of 1.3 mp.

FAQ 6:What is the scanning height of the YRC-S03, and what are the specific measurements? (Referring to depth of field)

A:The YRC-S03 has a scanning depth of 15mm.

FAQ 7: Can a health report be generated after the YRC-S03 scan? What does it look like?(Example below)

A：After the YRC-S03 scan is completed, a health report for the patient will be generated, as shown in the following figure: